Enable Tap to Pay Feature
- During the boot cycle when the pad displays the RBA version (splash screen), key in 2-6-3-4-enter. Then press the F key.
Splash Screen on Ingenico iSC Touch 250
Splash Screen on Ingenico iPP 320
- Select the Telium Manager option.
- Select initialization.
- Select Parameters.
- Select Contactless.
- Select “Yes”.
- Select “Internal” and then the Enter key.
- Some Ingenico PIN Pads may require you to hit the red X key 3 times to prompt you to save and reboot the PIN Pad. At this point, all settings are saved. Reboot the PIN Pad and run a test NFC transaction.